Setting items

Setting details

 

 

GUI

Screensaver : Make screensaver settings.

Make the settings related to • ON : The screensaver is activated during menu

displays on the TV screen.

display, Tuner screen display if no operation

 

is performed for an approximately 5-minute

 

continuous period. When you press uio p,

 

the screensaver is cancelled and the screen

 

before that screen saver started is displayed.

 

• OFF : Screensaver is not activated.

Format : Set the video signal format to be output for the TV you are using.

 

System Setup

 

 

Setting items

Setting details

 

 

Display

ON : Display is always on.

Set the display on/off

Auto OFF : Display is off except when showing the status display.

setting.

OFF : Display is always off.

This can also be set by pressing DISPLAY. Each time DISPLAY is pressed, the setting is

changed as shown below.

ON

 

Auto Off

 

OFF

version Basic

•NTSC : Select NTSC output.

•PAL : Select PAL output.

“Format” can also be set by the following procedure. However, the menu screen is not displayed.

1.Press and hold the main unit’s MENU and ENTER for at least 3 seconds. “V.Format:<PAL>” appears on the display.

2.Press the main unit’s o p and set the video signal format.

3.Press the main unit’s ENTER to complete the setting.

NOTE

Setup Lock

Protect settings from inadvertent change.

ON : Turn protection on.

OFF : Turn protection off.

When canceling the setting, set “Setup Lock” to “OFF”.

NOTE

When “Setup Lock” is set to “ON”, the settings listed below can no longer be changed. Also, “Setup Lock!” is displayed if you attempt to operate related settings.

• Menu operations

• Channel Level

• M-DAX

• Dynamic Volume®

• HT-EQ

• Display settings

version Advanced

When a format other than the video format of the connected TV is set, the picture will not be displayed properly.

Text : Display the details of operation when switching surround mode, input mode, etc.

•ON : Turn display on.

•OFF : Turn display off.

Master Volume : Display the master volume during adjustment.

•Bottom : Display at the bottom.

•Top : Display at the top.

•OFF : Turn display off.

When the master volume display is hard to see when superimposed on movie subtitles, set to “Top”.

Tuner : Set the tuner screen display time when the input source is “Tuner”.

•Always : Show display continuously.

•30s : Show display for 30 seconds after operation.

•10s : Show display for 10 seconds after operation.

•OFF : Turn display off.

vSee overleaf

Information

BD

60