Surr.Parameter

Default settings are underlined.

Adjust surround sound parameters. It may not be possible to set this item depending on the input signal (vpage 80 “Surround modes and surround parameters”).

Setting items

Setting details

HT-EQ

ON : “HT-EQ” is used.

Soften the treble range

OFF : “HT-EQ” is not used.

of movie soundtracks for

This can also be set by pressing HT-EQ.

better understanding.

 

DRC

Auto : Automatic dynamic range compression on/off control according to

Compress dynamic range

source. This can be set in the Dolby TrueHD mode.

(difference between loud

Low / Middle / High : These set the compression level.

and soft sounds).

OFF : Dynamic range compression always off.

D.Comp

OFF : Turn dynamic range compression off.

Compress dynamic range

Low / Middle / High : These set the compression level.

(difference between loud

 

and soft sounds).

 

Audio Adjust

Setting items

Setting details

 

 

C.Width

0 – 7 (3)

Assign center channel

 

signal to front left and right

 

channels for wider sound.

 

Height Gain

Low : Reduce the front height channel volume.

Control the front height

Middle : Front height channel sound is output with standard sound

channel volume.

volume.

 

High : Increase the front height channel volume.

NOTE

 

“Height Gain” is displayed for the following settings.

 

• When “Pre Assign” (vpage 55) is set to “F.HEIGHT”.

 

• When the “Speaker Config.” – “F.Height” setting (vpage 56) is set

 

other than to “None”.

 

• When surround mode is “PLgz” or the PLgz decoder is used.

Default

Yes : Reset to the defaults.

The “Surr.Parameter”

No : Do not reset to the defaults.

settings are returned to the

 

When you select “Default” and press ENTER,

version Basic

version Advanced

LFE

Adjust the low-frequency effects level (LFE).

–10dB – 0dB

For proper playback of the different sources, we recommend setting to the values below.

•Dolby Digital sources : “0dB”

•DTS movie sources : “0dB”

•DTS music sources : “–10dB”

default settings.

the “Return settings to the default?” prompt

 

 

is displayed. Select either “Yes” or “No”, and

 

press ENTER.

vSee overleaf

Information

C.Image

0.0 – 1.0 (0.3)

Assign center channel

 

signal to front left and right

 

channels for wider sound.

 

Panorama

ON : Set.

Assign front L/R signal also

OFF : Do not set.

to surround channels for

 

wider sound.

 

Dimension

0 – 6 (3)

Shift sound image center

 

to front or rear to adjust

 

playback balance.

 

BD

49