Set up speakers (Audyssey® Auto Setup)
Parameter Check
This function enables you to check the measurement results and equalizer characteristics after Audyssey® Auto Setup.
1 Use ui to select “Parameter Check” and then press ENTER.
Auto Setup
Auto Setup | Sp. Config. Check |
Parameter Check | Distance Check |
| Ch. Level Check |
| Crossover Check |
| EQ Check |
2 Use ui to select the item you want to check, then press ENTER or p. Measurement results for each speaker are displayed.
Sp. Config. Check Check the speaker configuration.
Distance Check | Check the distance. |
Ch. Level Check Check the channel level.
Crossover Check Check the crossover frequency.
EQ Check | Check the equalizer. |
•If “EQ Check” is selected, press ui to select equalizing curve (“Audyssey” or “Audyssey Flat”) to
be checked.
Use o p to switch the display between the different speakers.
version Basic
Advanced
Parameter Check
Sp. Config. Check 
Distance Check
Ch. Level Check
Crossover Check
EQ Check
Restore
3 Press RETURN.
The confirmation screen reappears. Repeat step 2.
Retrieving Audyssey® Auto Setup settings
If you set “Restore” to “Yes”, you can return to Audyssey® Auto Setup measurement result (value calculated at the start by MultEQ®) even when you have changed each setting manually.
17
version
Information