NOTE
•When “HDMI Control” is set to “ON”, it consumes more standby power.
•The HDMI control function controls operations of a TV that is compatible with the HDMI control function. Make sure that the TV and HDMI are connected when you perform HDMI control.
•Some functions may not operate depending on the connected TV or player. Check the owner’s manual of each device for details beforehand.
•When “P.Off Control” on the menu is set to “OFF” (vpage 58), this unit is not set to standby even if the connected device is in the standby mode.
•When connection changes are implemented, such as adding connections to HDMI devices, linked operations may be initialized. In this case, you will need to reconfigure the settings.
•When “HDMI Control” is set to “ON”, it is not possible to assign an HDMI connector to “TV” at “Input Assign” (vpage 64).
•Should any of the operations below be performed, the interlocking function may be reset, in which case, repeat steps 2 and 3.
•“Input Assign” – “HDMI” (vpage 64) setting has changed.
•There is a change to the connection between the devices and the HDMI, or an increase in devices.
BD
Convenient functions
Sleep timer function
The power automatically goes into standby once the set time has elapsed.
This is convenient for playing sources while going to sleep.
Press SLEEP and display the time you want to set.
The “SLEEP” indicator on the display lights.
• The time switches as shown below each time SLEEP is pressed.
OFF 
10 min 
20 
30 
40 
50
120 
110 
100 
90 
80 
70 
60 
To confirm the countdown time before putting the unit to sleep
Press SLEEP.
“Sleep : zmin” appears on the display. zz Countdown time
To cancel the sleep timer
Press SLEEP to set “OFF”.
The “SLEEP” indicator on the display turns off.
The sleep timer setting is canceled if this unit’s power is set to standby.
39
version Basic
version Advanced
Information