Input Setup
Input Mode (Audio) | Default settings are underlined. | Rename | |
The input modes available for selection may vary depending on the input source. |
| Change the display name of the selected input source. | |
Basic
Setting items | Setting details |
|
|
Input Mode | Auto : Automatically detect input signal and perform playback. |
Set the audio input modes | HDMI : Play only signals from HDMI input. |
for the different input | Digital : Play only signals from digital input. |
Setting items | Setting details |
|
|
Rename | • Up to eight characters can be input. |
Change the display name of • For character input, see page 46. the selected input source.
version
sources. | Analog : Play only signals from analog input. | |
It is normally recommended |
| |
to set the audio input mode | • “HDMI” can be set for input sources for which “HDMI” is assigned at | |
to “Auto”. | ||
“Input Assign” (vpage 64). | ||
| ||
| • “Digital” can be set for input sources for which “DIGITAL” is assigned | |
| at “Input Assign” (vpage 64). | |
| • If the input source is set to “GAME” or “TV”, it cannot be set to | |
| “Analog”. |
Default
The input source name is returned to the default setting.
Yes : Reset to the defaults.
No : Do not reset to the defaults.
If you select “Default” and press ENTER, the message “Return settings to the default?”
is displayed. Select “Yes” or “No”, and then press ENTER.
version Advanced
• When digital signals | are properly input, the | indicator lights on |
the display. If the | indicator does not light, check the digital input | |
connector assignment and the connections. |
| |
• If “HDMI Control” is set to “ON” and a TV compatible with the ARC is | ||
connected via the HDMI MONITOR connectors, the input mode whose | ||
input source is “TV” is fixed to ARC. |
| |
| Decode Mode |
|
| Auto : Detect type of digital input signal and decode and play automatically. | ||
| Set the audio decode mode PCM : Decode and play only PCM input signals. | |||||
| for input source. |
|
| DTS : Decode and play only DTS input signals. | ||
|
|
|
|
|
|
|
| BD |
| DVD |
| SAT | • This item can be set for input sources for which “HDMI” or “DIGITAL” |
|
|
|
|
|
| |
| GAME |
| AUX |
| TV | |
|
|
| is assigned at “Input Assign” (vpage 64). | |||
|
|
|
|
|
| |
•Normally set this mode to “Auto”. Set “PCM” and “DTS” when inputting the corresponding input signal.
BD
Source Level (Audio) | Default settings are underlined. |
•This function corrects the playback level of the selected input source’s audio input.
•Make this setting if there are differences in the input volume levels between the different sources.
Setting details
The analog input level and digital input level can be adjusted independently for input sources for which “HDMI” or “DIGITAL” is assigned at “Input Assign” (vpage 64).
66
Information