Connections
Important information
•Make connections as follows before using this unit. Select an appropriate connection type according to the devices to be connected.
•You may need to make some settings on this unit depending on the connection method. Refer to each description for more information.
•Select the cables (sold separately) according to the devices being connected.
NOTE
•Do not plug in the power cord until all connections have been completed. (When the Setup wizard is running, follow the instructions in the Setup wizard screen for making connections.)
•When running the Setup wizard, turn off the power supply of connected devices.
•When making connections, also refer to the operating instructions of the other devices being connected.
•Be sure to connect the left and right channels properly (left with left, right with right).
•Do not bundle power cords together with connection cables. Doing so can result in noise.
Examples of screen display
| • Menu screen |
| • Status display screen | ||
|
|
|
|
| When the input source is |
|
|
|
|
| switched. |
| Menu |
|
|
| |
|
|
| Surr.Parameter |
|
|
|
| Audio Adjust |
|
| |
|
| Information | Tone |
|
|
|
| Setup Wizard | AudysseySettings |
|
|
|
| System Setup | Manual EQ |
|
|
|
| Input Setup |
|
| |
|
|
| Audio Delay |
|
|
|
|
|
|
| [Auto] |
|
|
|
|
| SOURCE:BD |
|
|
|
|
| MODE :STEREO |
|
|
|
|
|
|
When the volume is adjusted.
Master Volume | |
|
|
version Basic
version Advanced
Relationship between video signals and monitor output
GFlow of video signalsH
Status display: The operating status appears briefly on the screen when the input source is switched or the volume is changed.
NOTE
Video device |
| This unit | Monitor (TV) |
|
| ||
| Input | Output |
|
Output | (IN) | (MONITOR OUT) | Input |
HDMI connector | HDMI connector | HDMI | HDMI connector |
|
| connector |
|
Component video | Component video | Component video | Component video |
connectors | connectors | connectors | connectors |
•If you operate the menu while playing back 3D video content or computer’s resolution (e.g. VGA), the playback video is replaced by the menu screen. The playback video is not displayed behind the menu screen.
•This unit does not show the status display while playing back 3D video content or computer’s resolution (e.g. VGA).
•The menu screen and status display are displayed when this unit and a TV are connected by HDMI. Furthermore, the menu screen and status display are not displayed when this unit and a TV are connected by VIDEO and COMPONENT VIDEO.
Information
Video connector | Video connector | Video connector | Video connector |
•Resolutions of
•HDMI signals cannot be converted into analog signals (vpage 84).
•Analog signals cannot be converted into HDMI signals (vpage 84).
4