Playback (Basic operation)

Settings (vpage 11)

nn Selecting the input source (vpage 18) nn Adjusting the master volume (vpage 19)

nn Turning off the sound temporarily (vpage 19)

nn Playing a Blu-ray Disc player/DVD player (vpage 19)

nn Playing a CD player (vpage 19) nn Tuning in radio stations (vpage 20)

Selecting a listening mode (Surround mode) (vpage 24)

Playback (Advanced operation) (vpage 38)

Important information

Before starting playback, make the connections between the different devices and the settings on the unit.

NOTE

Also refer to the operating instructions of the connected devices when playing them.

Selecting the input source

Press the input source select button (BD, DVD, SAT, TV, CD, TUNER or M-XP) twice to be played back.

When an input source select button (BD, DVD, SAT, TV, CD, TUNER or M-XP) is pressed

once, the unit switches to device selected by the operating mode of the remote control. If the input source select button is then pressed again twice, the input source for the unit is switched.

Select input source “AUX” to play back music from an audio system connected to the AUX INPUT jack.

The input source “GAME” is selected to playback from a game device connected to GAME connector of HDMI IN.

Select the input source “AUX” or “GAME” using one of the following methods.

•“Source Select” menu

(“Using the “Source Select” menu” provided on the right)

•SOURCE d f button on the remote control unit

(“Using the SOURCE d f button on the remote control unit” (vpage 19))

•INPUT SELECTOR knob on the main unit

(“Using the knob on the main unit” (vpage 19))

You can also use the following operation to select an input source.

nnUsing the “Source Select” menu

Source Select

Player

Video

Tuner

BD

SAT

TUNER

DVD

TV

 

CD

GAME

 

M-XPort

AUX

 

 

 

The currently selected input

 

 

source is highlighted.

[

] Move

[ENTER] Enter

q Press 3.

Display the “Source Select” menu.

w Use uio p to select the input source, then press ENTER.

The input source is set and the source selection menu is turned off.

•Input sources that are not going to be used can be set ahead of time. Make this setting at “Source Delete” (vpage 59).

•To turn off the source selection menu without selecting an input source, press 3again.

•When 3is pressed, the AMP-operation mode starts automatically (vpage 68).

version Basic

version Advanced

Information

vSee overleaf

BD

18