6.1-channel (Surround back speaker) connection

If using only one surround back speaker (with a 6.1-channel connection), connect to the “L” side of the FL/SBL/HL connector. For speaker settings in this case, see “When 6.1ch (Surround back speaker) installed” (vpage 30).

To perform 6.1-channel playback using the surround back speaker, set “Pre Assign” to “NORMAL” in steps 3 and 4 for “Set up “Pre Assign”” (vpage 35).

Also use the “Speaker Config.” setting (vpage 55) to set “S.Back” to “1spkr”.

NOTE

•A power amplifier (sold separately) is required for this connection.

•For speaker cable connections, see C page 6 “Connecting the speakers”.

•For speaker impedance, see page 31.

L

Power amplifier

Connect

version Basic

version Advanced

IN

L

FL SW

FR

 

C

SL

SR

SB

33

Information