Speaker Setup | Default settings are underlined. |
|
|
Perform when setting the speakers manually or when changing settings made in Audyssey® Auto Setup.
•If you change the speaker settings after performing Audyssey® Auto Setup, it will not be possible to select Audyssey MultEQ®, Audyssey Dynamic EQ® and Audyssey Dynamic Volume® (vpage 50, 51).
•“System Setup” can be used without changing the settings. Please set if necessary.
Setting items | Setting details |
|
|
Pre Assign | NORMAL : Set for connecting the surround back speakers to the FL/SBL/ |
The signal output from the | HL and FR/SBR/HR connectors in PRE OUT. |
FL/SBL/HL and FR/SBR/ | F.HEIGHT : Set for connecting the front height speakers to the FL/SBL/HL |
HR connectors on PRE | and FR/SBR/HR connectors in PRE OUT. |
OUT of the amplifier can be | FRONT : Set for connecting the front speakers to the FL/SBL/HL and FR/ |
switched in accordance with | SBR/HR connectors in PRE OUT. |
the speaker environment. | A power amplifier (sold separately) is required for this connection. |
| |
|
|
Speaker Config. | Front : Set the front speaker size. |
Select speaker configuration | • Large : Use a large speaker that can adequately play back low |
and size (bass reproduction | frequencies. |
capability). | • Small : Use a small speaker that has inadequate playback capacity for |
NOTE | low frequencies. |
|
System Setup
Setting items | Setting details |
|
|
Speaker Config. | Subwoofer : Set the presence of a subwoofer. |
(Continued) | • Yes : Use a subwoofer. |
| • No : Select when a subwoofer is not connected. |
| When “Front” is set to “Small”, “Subwoofer” is automatically set to |
| “Yes”. |
| Surround : Set the presence and size of the surround speakers. |
| • Large : Use a large speaker that can adequately play back low |
| frequencies. |
| • Small : Use a small speaker that has inadequate playback capacity for |
| low frequencies. |
| • None : Select when the surround speakers are not connected. |
| • When “Surround” is set to “Large”, “S.Back” and “F.Height” can be |
| set to “Large”. |
| • When “Surround” is set to “None”, “S.Back” and “F.Height” are |
| automatically set to “None”. |
S.Back : Set the presence, size and number of surround back speakers.
• Large : Use a large speaker that can adequately play back low |
frequencies. |
• Small : Use a small speaker that has inadequate playback capacity for |
low frequencies. |
version Basic
version Advanced
Do not use the outward shape of the speaker to determine selection of a “Large” or “Small” speaker. Instead, use the frequencies set in “Crossover Freq.” (vpage 57) as the standard for determining bass reproduction capability.
•When “Subwoofer” is set to “No”, “Front” is automatically set to “Large”.
•When “Front” is set to “Small”, “Center”, “Surround“, “S.Back” and “F.Height” can not be set to “Large”.
Center : Set the presence and size of the center speaker.
•Large : Use a large speaker that can adequately play back low frequencies.
•Small : Use a small speaker that has inadequate playback capacity for low frequencies.
•None : Select when a center speaker is not connected.
“Large” is not displayed when “Front” is set to “Small”.
• None : Select when the surround back speakers are not connected. |
• 2spkrs : Use two surround back speakers. |
• 1spkr : Use only one surround back speaker. When you select this |
setting, connect the surround back speaker to the left (L) channel. |
Even when the “S.Back“ setting is other than “None”, sound may not be emitted from the surround back speaker, depending on the playback source.
NOTE
When “Pre Assign” setting (vpage 55) is “NORMAL”, you can make the “S.Back” setting.
vSee overleaf
Information
BD | 55 |