Dual backup memory function

The unit stores settings information in nonvolatile memory even when the main power supply is turned off. Using the Dual Backup Memory function, you can write settings information to another memory area to back up saved settings for recovery anytime as needed. Remembering set details (Backup).

ZONE2 SOURCE

INTERNET RADIO DISPLAYnnRemembering set details (Backup)

Set the unit in the state you want remembering, and press and hold INTERNET RADIO and ZONE2 SOURCE for at

least 3 seconds.

“MEMORY SAVING” is shown in the display, and the setting details are remembered.

NOTE

•The volume is not remembered.

•If remembered details are overwritten, the previously remembered contents are deleted.

Panel lock function

To prevent accidental operation of this unit, you can disable operation of the buttons on the front panel.

 

 

 

 

 

 

 

 

 

INTERNET RADIO

X ON/STANDBY

 

 

 

 

 

 

STATUS VOLUME

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

M-DAX DISPLAY

ZONE2 SOURCE

nnDisabling all key button operations

1 Press X while you press and hold DISPLAY and

M-DAXwith the unit in standby mode.

2 Press INTERNET RADIO or ZONE2 SOURCE to select “FP/VOL LOCK On”.

3 Press STATUS to enter the setting. All button operations except X are disabled.

nnCanceling the Panel lock function

1 Press X while you press and hold DISPLAY and

M-DAXwith the unit in standby mode.

2 Press INTERNET RADIO or ZONE2 SOURCE to select “FP LOCK zOff”.

(z The currently set mode.)

3 Press STATUS to enter the setting.

The Panel lock function is canceled.

Even when the Panel lock function is set, you can operate the unit using the remote control unit.

instructions Advanced instructions Basic

Information

nnRecalling remembered details (Recovery)

Press and hold DISPLAY and INTERNET RADIO together for at least 3 seconds.

“MEMORY LOAD” is shown in the display, and the remembered details are recalled.

NOTE

•If there is no remembered data, “NO BACKUP” is shown in the display, and no remembered details are recalled.

•As the volume cannot be recalled, it returns to the factory setting volume.

DVD

nnDisabling all button operations except VOLUME

1 Press X while you press and hold DISPLAY and

M-DAXwith the unit in standby mode.

2 Press INTERNET RADIO or ZONE2 SOURCE to select “FP LOCK On”.

3 Press STATUS to enter the setting.

All button operations except X and VOLUME are disabled.

99