Picture AdjustDefault settings are underlined.
Picture quality can be adjusted.
We recommend leaving the settings unchanged from the default settings. First adjust the display image quality on your TV, and use this menu only when you want to make fine adjustments.
• This item can be set when the input source is CBL/SAT 
DVD 
MEDIA PLAYER iPod/USB NETWORK .
•Can be set when the “Video Conversion” setting (vpage 116) is “On”.
•“TV AUDIO” or “CD” can be set when “HDMI”, “COMP” or “VIDEO” (vpage 120, 121) has been assigned.
Setting items | Setting details |
|
|
Picture Mode | Standard : The standard mode suited for most living room viewing |
Select the desired picture | environments. |
mode according to the video | Movie : A mode suited for watching movies in a dark room such as a |
content and your viewing | theater room. |
environment. | Vivid : A mode that makes graphic images for games, etc. brighter and |
| more vivid. |
| Streaming : A mode suited for low bit rate video sources. |
| Custom : Adjusts the picture quality manually. |
| Off : No picture quality adjustment is done with this unit. |
•You can also press OPTION to make these settings from “Picture Mode” (vpage 68) in the option menu.
•The default settings are as follows.
•For “NETWORK” and “iPod/USB” input sources : Streaming
•For input sources other than “Network” and “iPod/USB” : Off
Contrast | ||
Adjust picture contrast. | “Contrast” can be set when “Picture Mode” is set to “Custom”. | |
| ||
|
| |
Brightness | 0 – +12 | |
Adjust picture brightness. | “Brightness” can be set when “Picture Mode” is set to “Custom”. | |
| ||
|
| |
Saturation | ||
Adjust picture chroma level | “Saturation” can be set when “Picture Mode” is set to “Custom”. | |
(color saturation). | ||
| ||
Hue | ||
Adjust green and red |
|
balance. Also called Tint. | “Hue” can be set when “Picture Mode” is set to “Custom”. |
|
Video
Setting items | Setting details |
|
|
Noise Reduction | Low / Medium / High / Off |
Reduce overall video noise. | “Noise Reduction” can be set when “Picture Mode” is set to |
| |
| “Custom”. |
Enhancer | 0 – +12 |
Emphasize picture |
|
sharpness. | “Enhancer” can be set when “Picture Mode” is set to “Custom”. |
|
•“Picture Adjust” can not be set when 4K signals are input.
•“Picture Adjust” can not be set when component video and video signals are output.
| HDMI Setup | Default settings are underlined. |
| |
Make settings for HDMI video/audio output. | |
|
|
Setting items | Setting details |
|
|
Auto Lip Sync | On : Compensated. |
Make automatic | Off : Not compensated. |
compensation for timing |
|
shift in audio and video |
|
output. |
|
HDMI Audio Out | AVR : Play back through speakers connected to the unit. |
Select HDMI audio output | TV : Play back through TV connected to the unit. |
device. |
|
| • The audio signal input from the HDMI input connector can be output as |
| an output signal from the HDMI output connector by setting the HDMI |
| audio output destination to TV. |
| • When the HDMI control function is activated, priority is given to the TV |
| audio setting (vpage 95 “HDMI control function”). |
| • When the power of this unit is on and “HDMI Audio Out” is set to “TV”, |
| audio is output as |
HDMI Pass Through | On : Passes the selected HDMI input through the AV receiver’s HDMI |
Selects how the AV receiver | output when the AV receiver is in standby power mode. |
will pass HDMI signals to | Off : No HDMI signals are passed through the AV receiver’s HDMI output |
the HDMI output in standby | in standby power mode. |
power mode. | NOTE |
| |
When “HDMI Pass Through” is set to “On”, it consumes more standby power. If you are not using this unit for an extended period, it is recommended that you unplug the power cord from the power outlet.
v See overleaf
instructions Advanced instructions Basic
Information
DVD
115