Installation/connection/setup of speakers (Advanced)

Basic

Procedure for speaker settings

Speaker installation

Speaker connection (vpage 81)

Set up speakers (vpage 91)

Speaker installation

Determine the speaker system depending on the number of speakers you are using and install each speaker and subwoofer in the room. Here, we explain how to install the speakers using a typical example.

The speaker impedance should be from 6 to 16 Ω/ohms.

This unit is compatible with Dolby Pro Logic gz (vpage 150) and DTS Neo:6 (vpage 151) which offers an even wider and deeper surround sensation.

When using Dolby Pro Logic gz, install front height speakers.

Use the illustration below as a guide for how high each speaker should be installed. The height does not need to be exactly the same.

Surround

Front heightspeaker speaker

Point slightly

downwards

 

At least

2 – 3 ft /

3.3 ft / 1 m z

60 – 90 cm

 

 

Surround back

Front

speaker

speaker

• Point slightly

 

downwards

GViewed from the sideH

zz Recommended for Dolby Pro Logic gz

When 7.1-channel speakers are installed using surround back speakers

FL SW

FR

 

C

z2

z1

 

z3

SL SR

Listening

position

SBL SBR

z1 22˚ – 30˚ z2 90˚ – 110˚ z3 135˚ – 150˚

NOTE

You cannot have audio output from the surround back speakers and front height speakers simultaneously.

instructions Advanced instructions

Information

GSpeaker abbreviationsH

FL Front speaker (L) FR Front speaker (R)

CCenter speaker SW Subwoofer

SL Surround speaker (L) SR Surround speaker (R) SBL Surround back speaker (L) SBR Surround back speaker (R)

v See overleaf

DVD

79