HDMI control function
If the HDMI control function does not operate properly, check the following points.
•Is the TV or player compatible with the HDMI control function?
•Is “HDMI Control” (vpage 116) set to “On”?
•Is “Power Off Control” (vpage 116) set to “All” or “Video”?
•Are the HDMI control function settings of all devices correct?
NOTE
•When “HDMI Control” is set to “On”, it consumes more standby power.
•The HDMI control function controls operations of a TV that is compatible with the HDMI control function. Make sure that the TV and HDMI are connected when you perform HDMI control.
•Some functions may not operate depending on the connected TV or player. Check the owner’s manual of each device for details beforehand.
•When “Power Off Control” on the menu is set to “Off” (vpage 116), this unit is not set to standby even if the connected device is in the standby mode.
•When connection changes are implemented, such as adding connections to HDMI devices, linked operations may be initialized. In this case, you will need to reconfigure the settings.
•When “HDMI Control” is set to “On”, it is not possible to assign an HDMI connector to “TV AUDIO” at “Input Assign” (vpage 120).
•Should any of the operations below be performed, the interlocking function may be reset, in which case, repeat steps 2 and 3.
•“Input Assign” – “HDMI” (vpage 120) setting has changed.
•There is a change to the connection between the devices and the HDMI, or an increase in devices.
DVD
• You can have the power automatically switched to standby once a set time has elapsed. This is convenient for viewing and listening while going to sleep.
• The sleep timer function can be set for each zone (vpage 102 “Sleep timer function”). (The MAIN ZONE setting method is explained here.)
1 Pressmode.MAIN to switch the zone
MAIN lights.
2 Press SLEEP and display the time you want to set. The SLEEP indicator on the display lights.
•The time switches as shown below each time SLEEP is pressed.
Off 
10 min 
20 
30 
40 
50
120 
110 
100 
90 
80 
70 
60 
Press SLEEP.
“Sleep : zmin” appears on the display. zz Countdown time
To cancel the sleep timerPress SLEEP to set “Off”.
The SLEEP indicator on the display turns off.
96
•The sleep timer setting is canceled if this unit’s power is set to standby.
•The sleep timer function can be set separately for the different zones (vpage 102 “Sleep timer function”).
NOTE
The sleep timer function cannot turn off the power of devices connected to this unit. To turn off the power of those connected devices, set up sleep timers on the connected devices themselves.
instructions Advanced instructions Basic
Information