Set up speakers (Audyssey® Setup)
Check ResultsThis function enables you to check the measurement results and equalizer characteristics after Audyssey® Setup.
1 Press SETUP to display the menu on the TV screen.
2 Use u to select “Speakers” – “Audyssey® Setup” and then press ENTER or p.
3 Use i to select “Check Results” and then press ENTER.
This unit can be connected to a home network (LAN) to listen to Internet Radio or play back music files and still image (JPEG) files stored on a computer.
1 Connect the LAN cable (vpage 20 “Connecting to a home network (LAN)”).
2 Turn on this unit (vpage 29).
This unit performs automatic network setup due to the DHCP function.
When connecting to a network that has no DHCP function, perform the setting in “Settings” (vpage 129).
Advanced instructions Basic
Audyssey Setup
Your AV receiver can automatically measure the acoustics of your room then optimize your speakers using the included microphone.
Set the following items if necessary.
Amp Assign
Channel Select
Check Results
Restore...
Start
Check Results
Check Audyssey Setup Measurement results.
Speaker Config.
Distances
Levels
Crossovers
Equalizers
instructions
4 Use ui to select the item you want to check, then press ENTER. Measurement results for each speaker are displayed.
Speaker Config. Check the speaker configuration.
Distances Check the speaker distance.
Levels Check the speaker channel level.
Crossovers Check the speaker crossover frequency.
Equalizers Check the equalizer.
•If “Equalizers” is selected, press ui to select equalizing curve (“Audyssey” or “Audyssey Flat”) to
be checked.
Use ui to switch the display between the different speakers.
5 Press o or BACK.
The confirmation screen reappears. Repeat step 2.
Retrieving Audyssey® Setup settingsIf you set “Restore...” to “Restore”, you can return to Audyssey® Setup measurement result (value calculated at the start by MultEQ®) even when you have changed each setting manually.
Information
DVD
28