Setting items

Setting details

 

 

Low Frequency Effects

–10dB – 0dB

Adjust the low-frequency

For proper playback of the different sources, we recommend setting

effects level (LFE).

to the values below.

 

 

• Dolby Digital sources : 0dB

 

• DTS movie sources : 0dB

 

• DTS music sources : –10dB

Center Image

0.0 – 1.0 (0.3)

Distributes the dialogue

The smaller the value, the more dialogue is concentrated on the center

output from the center

channel. The larger the value, the more dialogue is distributed to front

channel to the front left and

left and right channels, and the more the sound image widens in the

right channels and widens

front.

the sound image in the

 

front. You can set this when

 

the sound mode is set to

 

DTS NEO:6.

 

Panorama

On : Set.

Assign front L/R signals

Off : Do not set.

to also go to the surround

 

channels for wider sound.

 

You can set this when the

 

sound mode is Dolby PLg in

 

the “Music” mode.

 

Dimension

0 – 6 (3)

Shift sound image center

 

to front or rear to adjust

As you set a smaller number, the surround sound field shifts backward;

as you set a larger number, the surround sound field shifts forward.

playback balance. You can

 

set this when the sound

 

mode is Dolby PLg in the

 

“Music” mode.

 

 

Audio

 

 

Setting items

Setting details

 

 

Height Gain

Low : Reduce the front height channel volume.

Control the front height

Normal : Front height channel sound is output with standard sound

channel volume.

volume.

 

High : Increase the front height channel volume.

 

NOTE

 

“Height Gain” is displayed for the following settings.

 

• When “Assign Mode” (vpage 124) is set to “Front Height”.

 

• When the “Speaker Config.” – “Front Height” setting (vpage 124) is

 

set other than to “None”.

 

• When sound mode is “PLgz” or the PLgz decoder is used.

Set Defaults

Reset : Reset to the defaults.

The “Surround Parameter”

Cancel : Do not reset to the defaults.

settings are returned to the

 

default settings.

When you select “Set Defaults” and press

ENTER, the “Reset all surround parameters

 

 

to the factory defaults?” prompt is displayed.

 

Select either “Reset” or “Cancel”, and press

 

ENTER.

 

 

instructions Advanced instructions Basic

Information

Center Width Distributes the dialogue output from the center channel to left and right channels and widens the sound image in the front. You can set this when the sound mode is Dolby PLgx in the “Music” mode.

0 – 7 (3)

The smaller the value, the more dialogue is concentrated on the center channel. The larger the value, the more dialogue is distributed to front left and right channels, and the more the sound image widens in the front.

DVD

110