Marantz NR1604 Remote lock function, Last function memory, Various memory functions, Personal memory plus function, nnEnabling the remote sensor function

Remote lock function

•When not connecting an IR receiver, disable the Remote lock function. When the function is enabled, you can not perform operations with the remote control unit.

•By default, this function is disabled.

	INTERNET RADIO
X ON/STANDBY		STATUS

M-DAX DISPLAY

ZONE2 SOURCE

nnDisabling the sensor function of the remote control unit

1 When the main unit is in standby mode, press X while holding down DISPLAY and M-DAXon the

main unit.

2 Press INTERNET RADIO or ZONE2 SOURCE to select “RC LOCK On”.

3 Press STATUS to enter the setting.

The infrared light receiving function is disabled.

nnEnabling the remote sensor function

1 When the main unit is in standby mode, press X while holding down DISPLAY and M-DAXon the

main unit.

2 Press INTERNET RADIO or ZONE2 SOURCE to select

“RC LOCK zOff”.

(z The currently set mode.)

3 Press STATUS to enter the setting.

The infrared light receiving function on the main unit is enabled.

Various memory functionsPersonal memory plus function

This function sets the settings (input mode, sound mode, HDMI output mode, MultEQ®, Dynamic EQ, audio delay etc.) last selected for the individual input sources.

The surround parameters, tone control settings and the volumes of the different speakers are stored for the individual sound modes.

Last function memory

This function stores the settings which were made before going into the standby mode.

When the power is turned back on, the settings are restored.

instructions Advanced instructions Basic

Information

DVD

100