Getting Started

6.The Mode Menu

RC5400 provides different modes. For customizing your RC5400 you have to switch to the appropriate mode via the Mode Menu page.

The mode menus are utilized like this:

1Tap and hold the MODEicon more than 3 seconds in the LOWER TOOL

BAR. The Mode Menu page will appears.

2Select the mode you wish to use to customize your RC5400 by tapping the appropriate button on the Mode Menu.

When you operate your devices, RC5400 is in USE mode.

For actions other than operating (like

learning IR commands, recording macros, adding devices, and so on), you have to switch to the appropriate mode:

For learning IR commands from other remotes.

(Page 26)

For labeling buttons, pages and devices.

(Page 30)

For adding new devices and copying existing devices.

(Page 33)

For deleting buttons and devices.

(Page 37)

For changing the order of devices in the device overview. (Page 39)

For selecting the commands sending mode IR or RF.

(Page 40)

For recording and editing macros.

(page 44)

User Guide

14