Marantz RC5400 Macros Send Commands To Your System, Macros Can Contain Delay and Beep Between Steps, You can, You can, You can, You cannot

Customizing Your RC5400

You cannot jump to any Home page, Device Overview and Page Overview page. You are only allowed to jump to first page of each devices when programming with the RC5400 stand alone.

Macros Send Commands To Your System

You can make any or all of the 250 steps send a remote control command to your system. The step is actually just a recording of the location of any button on any device page. To record an RC command, you simply navigate to the panel and button you want, then touch it. Thus, all RC commands in a Macro must

first be taught to a button location first(see page 40-42).

You can record a “Device Action” which is what the device button on the Device Overview page really does (see page 42).

Macros Can Contain Delay and Beep Between Steps

You can program a Delay/Beep as any or all of the 250 steps of a macro (see page 41).

You can adjust that delay in 1/10th of a second intervals between 0.1 and 10.0 seconds (see page 41).

User Guide

22