Reference

3Select the device for which you want to change the IR / RF settings.

The IR / RF setting page appears. The reversed color button labeled IR indicates that the selected device is currently operated with IR signals.

4Tap RF button. The IR/RF settings for the selected device arechanged from IR to RF.When you have several RX-77sto operate

devices, you have to assign the correct Extender ID to the selected device. Continue with Step 5.

-or-

When you have only one RX-77, you can accept the default settings for the Extender ID and the Channel. Skip to step 6.

Note

The ID on the RF Extender has to match the Extender ID on the

 

Remote Control.

5Press and buttons beside the Extendor ID label to change the Extender ID number.

The RC5400 offers 16 Extender IDs.

6Tap Done to save the IR/RF settings for the selected device or Press the Right Function button labeled Cancel to return without changing the IR/RF settings for the selected device.

7Repeat instructions 1 to 3 for all devicesfor which you want to change the IR/RF settings.8Tap label to return to the Mode Menu page.The RC5400 is configured to operate the devices you have set with RF signals.

9Return to USE mode by pressing the Left Function button labeled Exit and try out the devices for which you just changed the IR/RF settings.

Note It is possible that a device does not respond properly when operated with RF signals. In that case, you have to reconfigure the Remote Control to operate the device with IR signals again.

UserGuide

45