Introduction
Charging the RC5400
For charging the RC5400, you use the docking station DS5400.
1Connect the power adapter to the docking station and plug it into a wall outlet.
2Slide the RC5400 into the docking station.
Charging starts immediately. The blue charging LED on the front of the docking station indicates charging takes place.
When the RC5400 is fully charged, the LED goes off.
30¡ to 45¡
Make sure you lift the RC5400 up at an angle of 30¡ to 45¡ when you take the RC5400 out from the docking station.
Note Normal charging time is 2 to 3 hours, depending on the condition of the battery pack.
You can operate the RC5400 while it is being charged. The battery pack does not have to be entirely empty before recharging.
You can place the RC5400 in the docking station at any time.
When the battery is running low, the Low Battery icon appears in the UPPER TOOL BAR. Recharge the RC5400 as soon as possible to ensure perfect performance.
Note The RC5400 retains all settings when the battery is completely dead. You will only have to reset the clock.
User
Guide
5