Marantz RC5400 Introduction, Cloning All Your Existing Remotes, ADD, ADD, LEARN, DELETE, component, non-Marantz, Marantz component, Create with RC codes

Customizing your RC5400

1.

2.

User Guide

Introduction

It is best to proceed with customizing in several stages.

The first stage is to teach all of your existing remote codes to the RC5400. The second stage is to practice using your home theater system with the RC5400. As you gain familiarity with your system, you’ll notice that many operations in a home theater require several steps. In the third stage of customization, you will record multiple step operations as either a “Macro” that you can play back with one button push or as a list of numbered steps recorded in a “Help List” device group.

In the next few pages you’ll find step by step guidelines on each of the three stages. When a more detailed explanation can be found in the Reference section, we’ve noted the page.

Cloning All Your Existing Remotes

1 Gather all of your remote controls in front of you.

2Play with all of the example devices. Compare the devices with your existing remote controls. Can you use any as templates for non-Marantz components?

3Use DELETE mode to delete all of the devices that you don’t use (see page 37).

4Use ADD mode to add the devices for each Marantz component (see page 35-36).

When you are prompted to add with or without RC codes, choose Create with RC codes .

5Use ADD mode to add a devices for each non-Marantz component (see page 36). Choose Create without RC codes .

6Switch to LEARN Mode to evaluate the page layouts of the new devices.

16