Reference
You cannot program the buttons in the Devece Overview page directly. You have to program them using Learn device action function (see page 28).
The RC5400 also offers empty control panel buttons which you can program and label as existing buttons. They are visible in USE mode as
Programming Touch Screen Buttons
1Tap and hold the MODE
icon in the LOWER TOOL BAR more than 3 seconds. Mode Menu page will appear.
2 Tap the LEARN button to switch to the LEARN mode.
3Select the Learn button button navigate to the device page
which contains the button you want to program.
4Point the device’s original remote control to the RC5400’s learning eye as shown on page 26.
5Tap the button you want to program on the RC5400.
Learning will be displayed on the DEVICE OVERVIEW button and the button s color is reversed.
6Press and hold the corresponding button on your device’s original remote control.
If the RC5400 has learned the command successfully, OK appears on the Device Overview button. You can let go of the button you’re holding. If the RC5400 has not learned successfully, you hear a short buzz and Failed appears.
7Program all other buttons you want and relabel them if necessary (see page
User
Guide
27