Marantz RC5400 INFO, Page, INFO, Exit, SETUP, Page +, Calibration, Left Function, Touch TOP LEFT corner, Calibration succeeded, Touch BOTTOM RIGHT corner

Frequently Asked Questions

How do I calibrate the Touch Screen?

The RC5400 is calibrated when it leaves the factory, so normally you do not have to calibrate it yourself. It is possible that the RC5400 displays a message to calibrate the Touch Screen. If this message appears do the following.

1Tap the INFObutton in the Upper Tool Bar. The information page will appear.

2Tap the SETUP button in the Information page. The first Setup page appears.

Navigate to third Setup page by using the Page + and Page - buttons.

3 Tap the Calibration button.

4Tap as close as possible the marker in the upper left corner using a blunt tip of a pencil.

You will see the instruction “Touch TOP LEFT corner”.

5Tap as close as possible the marker inthe upper left corner using a blunt tip of a pencil.

You will see the instruction “Touch BOTTOM RIGHT corner”.

6Tap as close as possible the bottom right corner using a blunt tip of a pencil.

You will see the message Calibration succeeded .

7Return to USE mode by tapping the INFObutton again or press the Left Function button labeled Exit .

UserGuide

53