Reference

There are two extra commands you can record as any step in a macro;

Recording a Device Action (Source or Input Switching)

To record a Device Action containing a source switching command, open the Device Overview page, hold down the Right Function button (labeled Action ) and tap the device you want to record the device action. This action places the entire Device Action in the Macro.

Note

If a macro has been recorded as a Device Action, you can

 

include all of it as a single step in another Macro, effectively

 

nesting one macro inside another.

Recording a Jump to a Device page

To jump to any device, open the Device Overview page, hold down the Left Function button (labeled Jump ) and tap the device you want to jump to. This action places the jump to the selected device s main page in the Macro.

Recording a Macro to a Device Button

Step By Step

1Tap and hold the MODEicon in the LOWER TOOL BAR more than 3 seconds. Mode Menu page will appear.

2Tap the MACRO button to switch to MACRO mode. The RC5400 displays first Macro mode page.

2Tap the Macro to DEVICE button to proceed to the next step. The Device Overview page appears.

3 Tap the device you want to program a macro.

4Complete steps 6 to 10 in “Recording a Macro to an Operation Button” on page 41.

User Guide

42