Marantz RC5400 8.Software, Choosing Another Channel, Wizz.it, Wizz.it, http://www.marantz.com, With Wizz.it, you can;, 4Tap the Done button to finish

Reference

Choosing Another Channel

When you notice RF interference or unreliable operation you should try choosing another channel to operate your devices.

Note All devices you want to operate with RF signals use the same channel. If you choose another channel for one device, the Remote Control will automatically change the channel for all devices that work with RF signals.

1 Switch back to IR / RF mode. The Device list box will appear.

2Select a device that is set with RF signals. The IR / RF setting page appears.

3Tap the + and - buttons beside the Channel label to change the Channel number.

The RC5400 offers 4 RF Channels.

Note The Channel (CH) on the RF Extender has to match the Channel on the Remote Control.

4Tap the Done button to finish.

8. Software

If you want to personalize your RC5400 even more, beyond its standard programming features, Wizz.it is the tool for you to use. Wizz.it is the RC5400’s companion software that you can download from the following internet address;

http://www.marantz.com

With Wizz.it, you can;

Add, delete, move and modify control pages, devices and commands anywhere on the touch screen.

Save, duplicate and share configuration files, codes or devices with other RC5400.

Preview new configuration files on Wizz.it Simulator. In this way you can check how the RC5400’s interface will look like.

User Guide

46