Customizing Your RC5400

4.Programming Help List

1Write a list of all of the actions in the operation you want to record.

2 Gather all of the remote controls you will need for the operation.

3Select ADD from the Mode menu. Choose “Copy Existing DEVICE” when prompted (see page 33-36).

In the device list, there is a device labeled “Help . Tap it to add the Help device.

4Switch to LABEL mode. Relabel the new device currently labeled Help 1 (for details on relabeling devices, see page 30- 32).

Try to use a descriptive title like POWER, RECORD, etc.

5Stay in LABEL mode. Relabel as many of the buttons on the five pages as you need.

Tip

Do not relabel the buttons labeled “Press for More ....” unless

 

the button is the last step in the operation.

6Switch to LEARN mode. Teach each button the appropriate command.

7Switch to MOVE mode. Move the new device to the appropriate position in the device list (remember, this determines the button position on Device Overview page).

8 Return to USE mode and test out your new list.

9You can make as many Help lists as you like. Simply repeat steps 1 through 8 for each operation you would like to program a help list.

User Guide

20