Customizing Your RC5400

6.Programming Macros & Page Jumps

You will do all of your Macro/Jump programming within a screen that will appear after you press the Macro button on the Mode menupage. Before proceeding with programming, make sure that you understand how to move around in the MACRO mode and how to read the RC5400’s shorthand notation for each macro step (see page 40).

1Write a list of all of the actions in the operation you want to record.

2Play with all of the example Macro buttons in MACRO device. Are any of these examples adaptable to your purposes?

3Use DELETE mode to delete all of the macro devices that you don’t like (see page 38).

4Use ADD mode to add a new macro device empty of any programming from the device list (see page 35-36).

5Switch to LABEL mode to re-label your macro devices. (see page 32).

6Switch to MOVE mode to re-order your macro devices, so that the most commonly used Macro devices are near the top (see page 39).

7Switch to LABEL mode and navigate to the your new macro device. Relabel the macro buttons with an appropriate name. The buttons are large so try to imagine a descriptive name even if it requires a few words.

8 Switch to MACRO mode. Tap the Macro to button to proceed.

Note

If you like to create a macro to the Device button, tap the

 

Macro to device button instead of the Macro to button

 

button.

UserGuide

23