Reference
8Return to the Mode Menu page by tapping 
label in the
LOWER TOOL BAR.
9Return to USE mode by pressing the Left Function button labeled Exit via the Mode Menu page.
Programming The Device Buttons to Switch Sources
Note | When you teach a command as a Device Action, this command |
| will be sent when you select the Device from the Device |
| Overview page. |
| Remember, the only way to NOT issue this command is to reveal |
| the Device Overview page, press and hold the Left or Right |
| Function buttons (now labeled No IR ) and select the device. |
1Tap and hold the MODE
icon in the LOWER TOOL BAR more than 3 seconds. Mode Menu page will appear.
2 Tap the LEARN button to switch to the LEARN mode.
3Select the Learn device action button. The Device Overview page appears.
4Complete steps 4 to 9 in “Programming Touch Screen buttons” on page 27. Instead of tapping a button on the Touch Screen, press the Device button you want to program.
Programming Hard Buttons Globally
And/Or Locally Per Device
The Hard buttons are defined as the five hard buttons on the right side of the Touch Screen (Channel Up/Down, Volume Up/Down, Mute) and the seven buttons below the Touch Screen (except the HOME, Left and Right Function buttons, since you cannot program
|
|
|
|
|
|
| them). |
|
|
|
|
|
|
|
| Note | It is not possible to teach commands to the HOME, LEFT and |
|
|
|
|
|
|
|
| RIGHT Function buttons on the remote. |
| User |
|
| Guide |
|
|
| Only via a PC, you can |
|
|
|
|
|
| |||
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
28