Reference

4You can add the device with or without RC codes.

n Create with RC codes: Choose this option if you have the exact Marantz component listed. The new device is added with operational buttons.

n Create without RC codes: If you choose this option, the new device is added with greyed-out buttons. Program them

 

using LEARN and LABEL mode.

Note

When you add a device without RC codes, all buttons are visible

 

as grayed-out.

By experimentally adding devices and inspecting them in USE mode, you can decide which is the best match to your component and delete the ones not used.

Tap the button of your choice.

The new device will be automatically displayed once you return to USE mode.

5Add all other devices you want and return to the Mode Menu

page by tapping label in the LOWER TOOL BAR.

6Return to USE mode by pressing the Left Function button labeled Exit .

Copy Existing Device

Tap the Copy existing device button in the ADD mode page to copy a device that is already active.

TIP

It is often useful to have two almost identical devices for your

 

Television. The only difference between the two is one would

 

have the Vol+ and Vol- Direct Access buttons programmed

 

locally with the televisions internal volume + and - commands.

 

Label this device TV Only (for use late at night without Surround

 

Sound). The other TV device has no programming in its Direct

 

Access buttons; as a result, the surround receiver’s Vol+ and

 

Vol- (programmed globally on the Home panel) is issued when

 

the TV device is selected.

User Guide

36