Reference

Recording a Macro to a Operation Button Step By Step

1Tap and hold the MODEicon in the LOWER TOOL BAR more than 3 seconds. Mode Menu page will appear.

2Tap the MACRO button to switch to MACRO mode. The RC5400 displays first Macro mode page.

3Tap the Macro to BUTTON button to proceed to the next step.

4Navigate to the device and the page that contains the button for which you want to create a macro.

5Tap the button you want to create a macro.

If the selected button cannot be used for a macro, you hear a beep which signifies a failure.

6Tap the Add button to enter the sequence of commands in a macro.

You can navigate to whatever control page you want, just as you do in USE mode except using Tab buttons. When you have selected the sequence, the RC5400 back to the Macro edit page.

7Tap the Delay button to enter the delay in a macro.

The delay is added in the macro list. You can adjust the delay time by pressing + and - buttons beside the list box.

8Tap the Beep to enter the beep in a macro. The Beep is added in the macro list.

9 Tap the Test button to try if the macro performes properly.

10 Tap the Done button to finish the macro if it performed properly. By pressing the Right Function button labeled

User Guide

Cancel , you can cancel creating a macro.

41