■Preparations for backlight
Insert into the inside the ribs. (4 places in total)
LCD | LCD | |||||
Prism Sheet | ||||||
Panel Frame | ||||||
|
| |||||
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
| |
wide side
LCD Panel Frame
For appearance standard information of the LCD process, refer to the "Common Assembly Instruction Manual".
LCD Prism Sheet
Remove the protection films. (both sides) |
| Holder Sheet | |
| LCD | ||
|
| 0~0.5mm | |
| Prism Sheet | ||
|
| ||
Handle with care. |
|
|
|
(Avoid fingerprints or scores.) |
|
| 1 |
|
|
| |
Holder Sheet
Attach two sheets.
| Details of "A" |
|
| 0~0.5mm |
|
narrow side | Avoid |
|
running |
| |
| over the |
|
| wall. |
|
| 0~0.5mm |
|
A |
|
|
Avoid running over the rib. | Tape | |
(both sides) |
| |
Insert into the inside the Hooks. (both sides)
Do not push or press the pull base.
| Reinforce Plate |
Attach in the same way as 3. | Handle with care. |
Symmetric shape | |
*Do not run over to the display side. | (Avoid fingerprints or scores.) |
CCFL |
|
|
| Safety Working |
|
Refrecter | Avoid any stress when handling. | |
(Handle with care not to break.) | ||
| Do not fix the Cable at this point. | |
| (Note) Handle with care not to damage | |
| the light guide plate by using the Cable. | |
Light Guide Panel |
|
Protection films is torn off. |
|
(both side) |
|
narrow side |
|
Adhesive Tape S |
|
Insert into the inside the ribs. | B |
(4 places in total) |
Light Guide Panel | A |
LCD FRAME
|
|
| Insert into the inside |
|
|
| the Hooks. |
DBEFD Sheet | Prism Sheet | wide side | (both sides) |
|
|
|
thin line: white
Avoid running over the rib of the LCD Frame.
Reinforce Plate
thick line: pink
Details of "B"
Insert between 5 and LCD Frame on the opposite side
(6) as well..
After attaching to the light guide plate, put pressure of 20 to 30N(2.0 to 3.0 Kgf) on the Frame.
Details of "A" | |
Adhesive | Attach |
Tape L | here. |
| |
| PET Tape |
| (black side) |
0~0.5mm |
|
*Avoid running over the display side. (Handle 4 in the same way.)
