3.1.3. Test register check for the source microcomputer.
Check the test register of the source microcomputer
3.1.4. ID check for 2700G
Confirm the ID of 2700G.
3.1.5. Chip ID check for LAN9118
Check the test register and chip ID of LAN9118.
3.1.6. Card detection pin check and tuple information check for PCMCIA
When you cannot obtain the tuple information, wait 0.5 second, then try to obtain the information by calling for API. Repeat this up to 10 times. (The maximum time required: 5 seconds.)
3.2. Display during the test
The following charactors are shown during the
*** SELF TEST ***
Now Testing...
3.3. Test Result
When the Self Test ends normally, each test result is shown on the display. The same result as Overall Result is shown underneath.
