9 Disassembly/Reassembly
Note:
Power off the computer. Do not shut down to the Suspend or hibernation mode.
Do not add peripherals while the computer is in the Suspend or hibernation mode; abnormal operation may result.
9.1.Disassembly Instructions
9.1.1.Preparation
Be sure to make the following preparations before disassem- bling.
•Shut down Windows and turn off the power.
•Disconnect the AC adaptor.
•Remove other devices if they are connected.
Attention:
•Please execute writing BIOS ID when you exchange the Main Board.
•Parts (Sheet and rubber) etc. related various the Conductive Cloth and Heat Spreader cannot be recycled. Use new parts.
5.Pull the tab of the Battery Pack and remove it from the wireless display.
hand strap
6. Attach the hand strap.
9.1.2.Removing the Battery Pack
hand strap cover
1. Open the hand strap cover.
hand strap
2.Remove the hand strap.
battery cover latch
battery cover
3.Slide the Battery cover latch.
4.Open and remove the Battery cover.
hand strap cover
7. Close the hand strap cover.
9.1.3.Removing the Display Unit
<N6> | <N6> | ||
<N6> | <N6> | <N6> <N6> | |
<N6> | |||
<N6> | |||
| <N6> | ||
|
| ||
<N6> |
| <N6> | |
<N6>
Antenna
Cover L
<N4>
<N4>
Rear Cabinet
<N4> | Antenna | |
Cover R | ||
|
<N4>
1.Remove the two Screws <N4> and the Antenna Cover L.
2.Remove the two Screws <N4> and the Antenna Cover R.
wireless display | battery pack |
