Installation Instructions
Connecting Wiring
!WARNING
To avoid risk of personal injury or electrical shock, do not ground through neutral wire if installation is in a mobile home or if local codes do not permit grounding through a neutral.
Improper connections of aluminum house wiring to copper lead can result in property damage, personal injury or fire. Use only connectors designed for joining copper to aluminum and follow manufacturers' recommended procedure closely.
1.With oven positioned in front of cabinet opening, connect wire leads extending from conduit to junction box. Verify neutral (white) wire is connected to appropriate terminal. Check local code to see which option should be used in grounding unit.
Option 1
Attach oven ground wire (green or bare) to junction box (if grounded) or a suitable ground.
Option 2
Connect oven ground wire (green or bare) to house ground feed wire (green, bare, or white). If grounding through white wire, observe above warning.
GRD
W
A
If oven is used in a mobile home or if local codes do not permit grounding through neutral, open connection and use grounding lead to ground unit in accordance with local codes. Connect neutral lead to branch circuit neutral conductor in usual manner.
2.Connect red and black wires to appropriate house electrical wiring.
3.Verify wiring by connecting electrical power at fuse box and checking for proper operation of unit.
•Some interior parts are finished with a protective coating of oil. When heated for first time oil will burn off and there will be some odor and smoke.
•Do not block air openings in bottom front of oven when making installation.
4.Insert oven into cabinet and check for flush fit to face of cabinet. If necessary screw unit to cabinet using holes in top and bottom of trim and screws provided.
A.Conduit
W.White neutral wire GRD. Bare ground wire
©2003 Maytag Appliances Company | 16021875 Rev. 0 |
