Maytag AOCS3040 Programming Instructions-ERC for AOES3030, Electronic Oven Control Options

+ or -

Programming Instructions—ERC for AOES3030

			P				STOP
LIGHT	HR	:	ER 3 5 0 °		+	TIMER	TIME	BAKE BROIL CLEAN
			BROILO			ON / OFF
			DELAY BAKE	N
	DELAY BAKE CLN STOP TIME		CLEAN LOCKED
OVEN					-		COOK
	TIME CONTROL					CLOCK		OVEN CONTROL
CANCEL							TIME

Electronic Oven Control Options

LIGHT— Use to turn light on and off inside oven. Light will automatically turn on when oven door is opened.

TIMER ON/OFF— Use to time any kitchen function or cancel timer.

STOP TIME— Use to set delayed bake and delayed self clean.

CLOCK — Use to set time of day.

OVEN CANCEL— Cancels any cooking or cleaning function.

COOK TIME — Use to set timed or delayed baking. BAKE— Use to set bake.

BROIL— Use to set broil

CLEAN— Use to set self-clean.

— Use to select temperature or time.

Special Oven Control Functions

Preheat Signal

After setting the oven to cook and selecting a temperature, oven will preheat. When oven reaches set temperature, a 1-second signal will sound.

End-of-Cycle Signal

When a timed cycle is complete, three long signals will sound. End of cycle signal will continue to sound until CANCEL is touched. If TIMER ON/OFF end-of-cycle signal is sounding, touch TIMER ON/OFF.

Child Lockout

This is a safety feature used to prevent children from accidentally programing oven. It disables electronic oven control. Touch and hold BAKE and COOK TIME for 5 seconds. “OFF” will display where the temperature normally appears. To reactivate control, press and hold BAKE and COOK TIME pads for 5 seconds. Child lockout feature must be reset after a power failure.

12-hour Automatic Cancel

This is a safety feature that prevents oven from continuing to operate if it has been left on for over 12 hours. If a cooking function continues longer than 12 hours without any oven control options being touched, this feature turns oven off. Any time an option is touched 12-hour automatic cancel is reset.

Timer Signal

When time elapses, timer beeps 3 times then once every 10 seconds until cancelled.

Increasing + or - Pad Speed

When setting time and temperature, hold pad to accelerate rate at which numbers increase or decrease.

Self-diagnostic System

Electronic range control has a self-diagnostic system. Self-diagnostic system sounds a series of short, rapid beeps and shows an "F-code" in display when there is a problem.

B—2 16021875 Rev. 0 ©2003 Maytag Appliances Company