Maytag AOES3030, AOCS3040 manual Field Selectable Options, Clock Time Format 12 or 24 hour format

Component Testing Information

!WARNING

To avoid risk of electrical shook, personal injury or death: disconnect power to oven before servicing, unless testing requires it.

		Illustration							Component	Test Procedure	Results
ERC4800 Controlled									Child lock out	This is a safety feature that can be
										used to prevent children from
										accidentally programming the oven. It
										disables the electronic oven control.
										Press and hold Bake and Cook Time
										for 10 seconds. “OFF” will display
										where the temperature normally
										appears.
										To reactivate the control, press and
										hold Bake and Cook Time for 10
										seconds. Child lockout features must
										be reset after a power failure.
									Relay board	Listen for relay to actuate.	If relay does not actuate, verify power to
					E1					Verify input and output power.	relay.
								E3
								E2
			K10	K11
							E14
E17
			Oven			Panel
			Light			Light
E16
								E15
			K4			K2
								E6
E11
			Bake			Conv.
						Element
	E10
								E7
			K5			K3
								E8
E13
			Broil			Door
						Lock
								E9
E12				E19
			K6
						K1
								E4
			Double			Conv.
			Line Brk			Fan
								E5
E18
									ERC/Adapter board	F1 - Control malfuction.	Replace ERC.
									assembly

Field Selectable Options

Standard: The standard setup is 8. This is a 12 hour type of clock, 60 Hz line frequency and an oven with a convection fan.

Clock Time Format 12 or 24 hour format

The time of day and the stop time can be displayed in either a 12 or 24 hour format. The control will come in a 12 hour format and can be changed to a 24 hour format from the front control panel.

Clock Time Base 60 or 50 Hz input line frequency

This is a time reference for the clock, timer, and internal timing of the control. The control will select the frequency automatically when the control is powered up.

Selecting Options

In order to select the field selectable options, Press and hold the CLOCK pad on power up of the control. To change the options press one of the slew pads until the desired option appears and in approximately 9 seconds the control will change to the normal operation or once selected press the CANCEL pad. The right time digit will indicate the current options selected as listed in the table below. (Standard setting is 8.)

Code Number	24 Hour Clock	50 Hz	No Convection Fan
8			
9	X		
H		X	
r	X	X	
o			X
d	X		X
−		X	X
Blank	X	X	X

X = indicates Selected  = indicates Not Selected

12 16021875 Rev. 0 ©2003 Maytag Appliances Company