Galaxy PW™ UPS 100 to 225kVA

2.2Unpacking

1.Remove the packing box and the document holder on the top of the cabinet; raise the cabinet.

2.Dismantle the blocks fixed beneath the cabinet by M12 screws, see Figure 2-2 (A or B), according to the width of the cabinet);

3.Dismantle the 4 M12 screws screwed on the 4 leg supports (C).

4.Withdraw the "hexagonal spacer + leg" assemblies delivered inside the document holder.

5.Screw the spacers onto the cabinet frame (C).

6.Lock these spacers in position using a 24 mm flat wrench, and fit the cabinet on its legs.

7.Adjust cabinet height and verticality by screwing or unscrewing the legs using a 13 mm flat wrench.

Figure 2-2: Dismantling Leg Supports and Attaching Spacers to Cabinet.

ABC

2 — 4

System Setup

86-133060-00 A00