Galaxy PWUPS 100 to 225kVA

The battery capacity is the value measured by the UPS microprocessor. It is expressed in Ampere-hours. This value changes over time depending on the parameters of the battery itself and its environment. This measurement is used to check that the battery is capable of supplying the rated power in the event of a mains outage.

BATTERY

CAPACITY (Ah)

 

 

T=30

days

last read: 05/09/1997

 

 

 

 

97

0

0

0

0

96

0

0

0

0

95

0

0

0

0

94

0

0

0

0

0

0

0

0

0

0

0

0

0

0

 

 

 

 

 

 

 

 

 

The backup time is the value calculated by the UPS microprocessor on the basis of measurements carried out on the battery. It is expressed in minutes. The calculation uses the percent load and the battery charge status at the time of the measurement.

BACKUP (min)

 

 

 

 

T=30

days

last read:

05/09/1997

 

 

 

 

120

0

0

0

0

115

0

0

0

0

110

0

0

0

0

105

0

0

0

0

0

0

0

0

0

0

0

0

0

0

 

 

 

 

 

 

 

 

 

The load level is the ratio between the power supplied by the UPS to the load at the time of the measurement and the rated output of the UPS. It is expressed as a percentage.

OUTPUT LOAD LEVEL(%)

 

 

T=30 days

 

last read: 05/09/1997

 

 

 

 

63

0

0

0

0

52

0

0

0

0

63

0

0

0

0

63

0

0

0

0

0

0

0

0

0

0

0

0

0

0

 

 

 

 

 

 

 

 

 

4 — 22

Operation

86-133060-00 A00