Galaxy PW™ UPS 100 to 225kVA
The display is structured around primary and secondary messages, measuring tables and setting screens. As a rule, the message displayed on the screen is always a primary one. The secondary messages, if any, are accessed by pressing keys 9 ▲ and 10 ▼. See Figure
The presence of secondary messages is indicated by the arrow Ø at the end of the primary message. Return to the primary messages is automatic if the keypad is not used for 2 minutes, or direct by pressing key 17 The display screen lights up when a key is pressed, and goes off if no key is pressed for 5 minutes.
NOTE | Most functions may be directly accessed. For example, when voltagemeasure- |
| ments are currently displayed, it is possible to directly access current |
| measurements by pressing the "A" button. |
|
|
In addition to keypad operations, the graphical display brings up a window giving the overall device status. The message displayed is then said to be primary (see list in the paragraph below). A primary message can be used to access the measuring tables using keys 13 , 14 , 15 and 18 on the keypad The configuration screens can be accessed by pressing key 12 .
A flashing arrow appears at the end of a primary message if there is a problem or an alarm. secondary messages can be accessed by pressing key 9 on the keypad (see the list of secondary messages). The presence of another message is indicated by the arrows Ø and ≠ at the end of the secondary message. They can be accessed by pressing keys 9 and 10 on the keypad.
The return to the primary message is automatic after a 2 minute time delay or by pressing key 17 on the keypad.
IMPORTANT | Select English U. S. as the display language to match the displays as presented |
| in this manual. |
|
|
A — 4 | Appendices |