Installation and User Manual

3.8.1"Temperature Monitor" installation in a Battery Room

The "Temperature Monitor" should be secured against a wall or any vertical support. See Figure 3-10.

1.Choose a location near the batteries and away from draughts which adversely affect the accuracy of temperature measurements. Dimensions: 75 x 75 x 21 mm.

2.Use the holes provided in the base plate to screw the unit to the vertical support, unless the connecting cable runs on the surface, break the knock-out in the unit base plate provided for cable entry. Secure the cable by suitable means so that it does not pull on the unit.

Figure 3-10: Temperature Monitor" Base.

Mounting Hole
board

 

 

 

 

Cable Entry

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Mounting Hole

Dimensions: 75 x 75 x 21 mm

86-133060-00 A00

Installation

3 — 11