Middleby Marshall PS200-R68 Section Maintenance, Remove conveyor drive chain cover as shown

SECTION 4

MAINTENANCE

3. Remove conveyor drive chain cover as shown.

Figure 4-4.

4.Remove tension from drive chain by lifting and pushing the conveyor slightly into the oven. Remove drive chain

from conveyor drive sprocket as shown.

Figure 4-5.

5. While one person pulls the conveyor out from the drive end of the oven the second person should lift the far end (opposite end) of conveyor until crumb tray slide is clear. Then both people can begin sliding conveyor out from the drive end of the oven, as shown, folding as they go. Move slowly and use caution as the conveyor chain and the drive sprocket can be easily damaged.

Figure 4-6.

6.Remove the lower end plug from each end of the oven. Refer to Figure 4-3.

37