Middleby Marshall PS200-R68 installation manual Section Maintenance, Extended Lip, Figure

SECTION 4

MAINTENANCE

2.Reassemble bottom fingers into oven first by pushing in on their back side. Refer to Figure 4-16 for correct finger position in oven.

IMPORTANT: Only M6 fingers fit in the bottom row. All M3 finger cover plates have extended lips at front. This extended lip will not allow these fingers to be installed in the bottom row.

a. IMPORTANT: When inserting fingers the tab on the outer plate must be in the groove as shown in the illustration. There is a blocking tab on the outside of the groove which will prevent inserting the finger in the groove if the outer plate is moved away from the flange of the finger manifold. Refer to Figure 4-22.

Extended

Lip

			Flange of Finger
			Manifold
	Blocking	Tab on	Tab to Rest
			End Plug On
	Tab	Outer Plate
	Tab on
Figure 4-22.	Outer Plate

45