Millennium Enterprises Integrated Modeling Amplifier manual Setting Up, Making Connections

Johnson Millennium

Section - 2 Setting Up

Section-2 Setting Up

Making Connections

Your Millennium can be connected in several different ways to meet the requirements of specific applications. The following diagrams offer some different ways your Millennium can be connected.

NOTE: In the following diagrams, we have shown use of the external FX loop.

Input Output

Loop Send Loop Return

Input

Left Speaker Output

Right Speaker Output

Millennium into Two 2X12 or 4X12 Extension Speaker Cabinets with Selectable Voicings

The Millennium Two-Fifty offers selectable voicing modes for using either 2X12 or 4X12 extension cabinets located in the Utility menu. To select which voicing is to be used. From Program mode, press the <Utility> button and turn the <Data/Wheel> until you reach page 1. Now use the <3> knob to select either the 2X12 or 4X12 voice. Once the selection has been made, press the <Program> button to exit. You can now make connections from the left and right extension cabinet outputs (located on the rear of the Millennium). Use an un-shielded speaker cable and run into the input jacks of either 2X12 or 4X12 extension cabinets. Always make sure that the extension speaker cabinet being used has minimum input load resistance of 4 ohms.

User Guide

13