Millennium Enterprises Integrated Modeling Amplifier manual The J-12Foot Controller, User Guide

Johnson Millennium

Section - 6 The J-12 Foot Controller

3.Turn either function keys <2 or 3> to assign a CC number to the selected expression pedal . The display will appear like this on page 11 if, for example Exp 1 is selected. (Exp1=Internal Expression pedal 1 insert on Millennium w/o the J-12. Or, expression pedals 1 or 2 on the J-

12 when connected. The display now reads:

2	CCsnd:Exp1					Exp2￿￿
	1			30			OFF	4
			2			3
	LINK CHANGED		LINK CHANGED			LINK CHANGED		LINK CHANGED
		WAH TUBE EQ				GATE
									L/R OUTS
FACTORY USER					#DIGITAL
PAGE11 OF 16 b
						CLIP			L/R OUTS

Page 12 will appear like this:

	CCsnd: Exp3						Exp4
2							￿￿
	1			OFF			OFF
			2			3
	LINK CHANGED		LINK CHANGED			LINK CHANGED		LINK CHANGED
		WAH TUBE EQ				GATE
									L/R OUTS
FACTORY USER					#DIGITAL
PAGE12 OF 16 b
						CLIP			L/R OUTS

4. Press the <Utility> button to exit.

For a complete explanation of expression pedal names, please refer to page 68.

CCTransmit Channel - This option allows you to set the MIDI channel on which CCs will be sent out the Millennium MIDI Out port to other MIDI devices. If you are using the J-12 for the Millennium only, you don't need to worry about setting up this option.

However, if you plan to use the J-12 for continuous control over other MIDI devices (either in conjunction with the Millennium or by themselves), you need to assign a MIDI transmit channel for each of the CC numbers you'll be using for continuous control of the other devices.

To change the MIDI channels on which the selected CCs will transmit to other MIDI devices, do the following:

1. Press the <Utility> button once. The and the display should appear something like this:

2	Stereo				Cab:4x12￿￿ Tuner
	1	2	2		￿		3	2	4	Off
	LINK CHANGED			LINK CHANGED			LINK	CHANGED	LINK CHANGED
				WAH	TUBE EQ		GATE
											L/R OUTS
FACTORY USER						#DIGITAL
PAGE 1 OF 16 b
							CLIP				L/R OUTS

User Guide

73