Millennium Enterprises Integrated Modeling Amplifier manual Amplifier Model and Channel Selection

Johnson Millennium

Section - 2 Setting Up

•When the tone controls are used, the display will appear as follows on page 2 of the amplifier module when the Millennium is in Edit mode:

a:gain lvl

B:GAIN LVL

.40

70.

.70

1

2

.50

3

4

LINK CHANGED

LINK CHANGED

LINK CHANGED

LINK CHANGED

2￿

WAH

TUBE EQ

GATE

L/R OUTS

BANK

USER

￿

#DIGITAL

PAGE

2 OF 5 b

•Using the <Page> knob turn to page 4 and the display will appear like this:

		CHN B:TREB					MID		BASS
				2	25.	3	.25	4	25.
		LINK CHANGEDLINK CHANGED					LINK CHANGED		LINK CHANGED
	2￿		WAH		TUBE EQ		GATE
											L/R OUTS
BANK	USER	￿				#DIGITAL
PAGE	4 OF 5 b

Amplifier Model and Channel Selection

Selecting amplifier types in the Millennium is as easy as pushing a button. To call up any one of the amplifier model types, simply press one of the six buttons in the <Amplifier Modeling> button array (subsequent presses of any amplifier model button will move you to the next amplifier model available), or turn the <2> when the Millennium is in edit mode on page 1 of the Amplifier module. A-B channel switching can be achieved within the Amp model by pressing the <Channel> button, or turning the <4> button while the Millennium is on page 1 of the Amplifier module in edit mode. Always remember to save any changes.

Amplifier Contour Control

Using the <Contour> knob will give you the ability to control the tonal qualities of the power amp section of the Millennium. When the <Contour> knob is turned all of the way down, the power amp tone is flat. Turning up the knob brightens up the signal in the power amp section.

Digital Effects

Wet/Dry Mix Adjustments Global or Local

To change the mix of dry and wet signal of the overall effect level, use the <Mix/Page> knob. Mix settings range from 0 (all dry) to 100% (all wet) when the Millennium Wet/Dry mix is set to Local or Global. When the Wet/Dry mix is set to Global (setting the Wet/Dry mix either Local or Global is done on page 2 of the Utility menu), the mix control effects the percentage of Wet/Dry mix in every preset. As the acoustics of any room change, you can easily adjust the mix of your effects accordingly with the turn of a knob. The master mix of each preset can be modified in the Master mix menu while in edit mode by pressing the <Edit> button then scrolling through the preset pages until the L/R Out and speaker icons blink.

User Guide

17