Millennium Enterprises Integrated Modeling Amplifier manual Un-Linkingor Viewing Parameter Control

Available Link

Section - 6 The J-12 Foot Controller

Johnson Millennium

3.At this point, use the <2> knob to select the Bank to be named. Once the Bank has been selected, turn the <4> knob to rename the Bank. The display now appears like this:

2	Name:Top 5							￿￿
		CAP			nbr￿			Ins		COP
	1			2			3		4
	LINK CHANGED			LINK CHANGED			LINK CHANGED		LINK CHANGED
			WAH TUBE EQ				GATE
											L/R OUTS
FACTORY USER						#DIGITAL
b											L/R OUTS
							CLIP

4.To exit the naming bank assignment, press the <Utility> button.

5.Using the <1> knob, change the character to the one you want in the selected position.

6.When the correct character is displayed in that position, use the <Page> knob to scroll the cursor to the next character you want to change.

7.Use the <2> knob to select numbers, the <3> knob to insert spaces and the <4> knob to copy and paste characters.

8.To copy a character, position the cursor under the character you want to copy (using the <Page> knob), then turn the <4> knob clockwise. To paste the copied character, position the cursor where you want to paste the character, then turn the <4> knob counter- clockwise.

9.To abort the procedure, push either the <Preset> button to take you to Preset Mode, the <Edit> button to take you to FX Edit Mode, or the <Utility> button to take you to Utility mode, depending upon which mode you want to enter.

Un-Linking or Viewing Parameter Control

1.To un-link or view a parameter that has been assigned to a footswitch, Expression Pedal or LFO simply press the <Assign> button twice The display will tell you which parameter is linked to which footswitch. To unlink, simply turn the <1> knob and the top line of the display

will now read:

2. To see any other parameter links in the selected program, press the <Assign> button twice and then turn the <Page> knob.

76

User Guide