Millennium Enterprises Integrated Modeling Amplifier manual Auto Wah, Whammy Effect Parameters

Johnson Millennium

Section - 4 Editing Modules

Whammy Effect Parameters

Whammy On/Off Turns the Whammy module on or off. When the module is turned off, the signal will only continue to pass through the module if the dry level is turned up.

FX Level	This parameter lets you select the overall FX level mix of the Whammy Effect module. Ranges from: Off to 100%.
Dry Level	This parameter lets you select the amount of Dry signal that is included in the Whammy effect. Ranges from: Off to
	100%.
Balance	This parameter allows you to pan the Dry signal either to the Right or the Left in the stereo soundfield. Ranges from
	Left 99 to Right 99.
Min Shift	This parameter sets the minimum pedal shift level of the Whammy effect. Ranges from: -72 (6 octaves down), to 24
	(2 octaves up).
Max Shift	This parameter set the maximum pedal shift level of the Whammy effect. Ranges from: -72 (6 octaves down), to 24 (2
	octaves up).
Min Detune	This parameter sets the minimum pedal level of detune effect. Ranges from: -50% (down 50 cents), to 50% (up 50
	cents).
Max Detune	This parameter sets the maximum pedal level of detune effect. Ranges from: -50% (down 50 cents), to 50% (up 50
	cents).
Pedal	This parameter is used for the assignment of an expression pedal. This parameter also shows the pedal travel range.
	Ranges from: 0 to 100
Out	This parameter is used to set the overall output level of the Whammy module. Ranges from: 0 to 100%
Pan	This parameter is used to position the Whammy effect in the Stereo soundfield. Ranges from: Left 99 to Right 99.

Auto Wah

The Auto Wah is a great effect use when you want a nasally wah-type effect, but you don’t want to do the leg work. The Auto Wah utilizes a sensitivity detector that reads the input signal, then simulates the action of a wah pedal.

Auto Wah Effect Parameters

Auto Wah On/Off Turns the Auto Wah module on or off. When the module is turned off, the signal will continue to pass through the module.

FX Level	This parameter lets you select the overall FX level mix of the Auto Wah Effect module. Ranges from: Off to 100%.
Sensitivity	This parameter adjusts the sensitivity of the detection of the automatic wah. The higher the sensitivity is set, the
	wider the Wah range will be. Ranges from: Off to 100%.

User Guide

55