Johnson Millennium
Section - 4 Editing Modules
Gain | Controls the output gain of the LPF. Ranges from |
Dly A - B | Controls the percentage of DELAYTIME allocated to delay voices A and B. For example, if DELAYTIME (above) is set |
| to 1000 ms and DLYA is set to 75%, the voice A delay time is 750 ms. Remember, each voice in the Module can have |
| any delay time up to 100% of DELAYTIME. Ranges from 0% to 100%. |
Dly C - D | See Dly A - B. |
Out | Adjusts the overall level of the Delay. Ranges from Off to 100%. |
Pan | Controls the stereo soundfield placement of the delay. Ranges from |
Out L - R | Adjusts the left or right output level of the Delay. Ranges from Off to 100%. |
Out A - B | Adjusts the output level of delay voice A or B. Ranges from Off to 100%. |
Pan A - B | Controls the stereo soundfield placement of delay voice A or B. Ranges from |
Out C - D | Adjusts the output level of delay voice C or D. Ranges from Off to 100%. |
Pan C - D | Controls the stereo soundfield placement of delay voice C or D. Ranges from |
Out LA - LB | Adjusts the |
Out RA - RB | Adjusts the |
Out LC - LD | Adjusts the |
Out RC - RD | Adjusts the |
Compressor |
|
Compressor Parameters | |
Level | Controls the signal input level fed to the module. Ranges from Off to 100%. |
Threshold | Sets the threshold level of the compressor. Ranges from |
Ratio | This parameter sets the compressor ratio. Ranges from 1.5 to 40. |
Gain | This parameter controls the amount of gain in the compressor. Ranges from 0 to 200%. |
Attack | This parameter controls the attack time of the compressor. Settings are: Slo, Med and Fast. |
Release | This parameter sets the release of the compressor. Settings are: Slo, Med and Fast. |
User Guide
51