Millennium Enterprises Integrated Modeling Amplifier Volume Pedal Assignments, Advanced Topics

Section - 5 Advanced Topics Johnson Millennium

4. Now using the <Page> knob, turn to page 2 and the display will appear like this:

	2		Vol Pdl						Morph Pdl
				100￿%						0 %
			1						3
			LINK CHANGED		LINK CHANGED				LINK CHANGED
					WAH TUBE		EQ GATE
											L/R OUTS
FACTORY USER		b				DIST	EQ	#
BANK	2 OF 2
PAGE											L/R OUTS

5.By turning the <3> this will activate the Morph pedal parameter making it ready for assignment. Now press the <Assign> button and the display will appear something like this:

Select a Contrl F.Switch

2	LINK CHANGED	LINK	CHANGED		LINK CHANGED
		WAH	TUBE	EQ	GATE	L/R OUTS
FACTORY USER			DIST	EQ	#
b						L/R OUTS

6.Now select the expression pedal to be assigned. This can be either one of the two expression pedal inserts located on the rear of the unit, or one of the two expression pedals on the J-12 foot controller and the display will appear something like this:

Morph Exp 1 Min [99] Max

2	1 On	2 0		3 -99	4 99
	LINK CHANGED	LINK CHANGED		LINK CHANGED
		WAH TUBE	EQ GATE		L/R OUTS
FACTORY USER		DIST	EQ	#
PAGE 1 OF 19 b					L/R OUTS

7.In this example, Expression pedal 1 of the J-12 is now assigned to morph between Solid State and Tube distortion models. Note that -99 as the minimum value represents the Solid State (bottom) Amp and the maximum being 99, represents the Tube (top) distortion. To return to Preset mode, press the <Preset> button. Always remember to save any changes.

Morphing Between Effect Modules

Not only does the Millennium allow you to morph between Amplifier modules, but it also gives you the ability to morph between effect modules. This can be done when using Effect Configurations 6, 12 or 15 which are split configurations.

The procedure for assigning the morph pedal to the effect modules uses the same steps as 3 through 7 of the Amplifier Morphing assignment procedure.

Volume Pedal Assignments

Volume control can be assigned to any preset within the Millennium. When volume control is used in a selected preset, you have the option of using either one of the two Expression pedal inserts (located on the rear of the unit), or the expression pedal available on the optional J-12 foot controller.

The procedure for assigning volume control to any preset of the Millennium is as follows:

60

User Guide