Millennium Enterprises Integrated Modeling Amplifier Momentary Footswitch Assignment, User Guide

Section - 6 The J-12 Foot Controller

Johnson Millennium

2. Turn <Page> knob to page 3 and the display will read:

	MIDI: RcvChnl					TransChnl
2							￿￿
	1			￿ 1	3				1
			2					4
	LINK CHANGED		LINK CHANGED		LINK	CHANGED		LINK CHANGED
		WAH TUBE EQ			GATE
										L/R OUTS
FACTORY USER					#DIGITAL
PAGE 3 OF 16 b
					CLIP					L/R OUTS

3.Turn the function knob <4> to select the MIDI CC transmit channel. For example, select channel 10 and the display will now appear like this:

	MIDI: RcvChnl					TransChnl
2							￿￿
	1			￿ 1	3				10
			2					4
	LINK CHANGED		LINK CHANGED		LINK	CHANGED		LINK CHANGED
		WAH TUBE EQ			GATE
										L/R OUTS
FACTORY USER					#DIGITAL
PAGE 3 OF 16 b
					CLIP					L/R OUTS

4. To exit the Transmit channel assignment, press the <Preset> button.

Momentary Footswitch Assignment

The Millennium now has the ability to assign any footswitch of either the J-12 or Digitech Control One foot controllers to act as momentary switches. This will give you the ability to toggle the value a parameter by a press /hold and release of the selected footswitch. The momentary footswitch assignment can be done by performing the following procedure:

1.When the parameter for assignment has been selected, press the <Assign> button once. After you have selected the footswitch for assignment, the display will appear something like this:

Fx:lvl FS # Min[ 96] Max

1

Ont

2

F6

3

Off

4

100

LINK CHANGED

LINK CHANGED

LINK CHANGED

LINK CHANGED

2￿

WAH

TUBE

EQ GATE

L/R OUTS

BANK

USER

￿

#DIGITAL

PAGE

6 OF 19 b

2.Now turn the <1> button to set the footswitch to either: Ont (On Toggle) or OnP (On Momentary).

3.Choosing the OnP setting will make the footswitch perform as a momentary footswitch. This means that the footswitch will toggle the selected parameter while pressed, and once released, the parameter will return to its original value.

74

User Guide